January 24, 2022


The Automotive Fanatics

What is Included in a Brake Service?

If you have an older vehicle, you may be surprised to know that brake repair isn’t something you do yourself. Instead, you call in a professional brake repair technician. What is included in a basic brake repair, and when is it covered? And do you need to have your brakes checked periodically by a professional as well?

The parts included in a brake repair consist of the brake system, the brake pads, the brake fluids, brake linings, and the wheel cylinders. What usually happens with an older vehicle is the brake repair consists mainly of replacing brake pads and cleaning rotors. Sometimes the car may only need to change the brake fluids or clean the rotors. Changing the brake fluid can be a simple task, but cleaning and replacing the rotors is where most vehicle owners mess up. A professional brake repair in New Orleans  will not only change the brake fluids but will also inspect and check the rotors to ensure they are in good condition.

Replacing brake pads

When brake pads get worn out or they get old and dull, it is time to have them replaced. The replacement process consists of removing the old ones and replacing them with new ones. During the installation, the new pads will be shaped according to the original design and specifications. They will be made to fit and perform properly. The actual replacement process normally takes less than an hour to complete and often involves fewer than two parts.

The brake inspection process

The inspection process consists of checking the brake calipers and rotors for any damage, cracks, corrosion, or signs of wear. Then the pads are tested to ensure they are operating correctly. Sometimes there will be an adjustment needed to reach the proper pressure. This usually takes place on the brake pedals or brake lever. After the adjustments, a brake repair service will be called over to check if everything has worked properly.


If your brakes are old, they will need maintenance. The first thing you can do is inspect the brake master cylinder. In this cylinder, the master cylinder locks the brakes into place. If either caliper or rotor should break, this device will break too, so you must replace it as soon as possible.

If your vehicle uses a conventional braking system, then most of the parts will not need replacement. If you have an automatic, then most of the parts will need replacement. The front brake master cylinder is one part that will usually require replacement. If it is not replaced, then it will fail the automatic braking system. If the brake light goes out while driving, you need to inspect the brake system because brake failure means failure to the driver’s consciousness.

The brake fluid

The other most essential part is the brake fluid. If it is too low or too much, you will get into trouble. You should also look for indications on the brake pads. If the pads are black with rust, then it indicates low brake force. If the brake pads are red, then it indicates that the brake fluid is too rich.

Other things to look for are loose bolts and drums, worn rotors, worn out pads and calipers, and worn out rotors and drums. Your brakes have to be well oiled, and the hydraulic brake system needs to be inspected thoroughly. All these components can cause your brakes to stop suddenly, which is why proper maintenance for your brakes is essential.